Tramex RMK Roof Master Kit



Price: $ 9,995.00

Tramex RMK Roof Master Kit
Non-destructive checking of moisture conditions in roofing

The Tramex RMK Roof Master Kit is a complete kit for the Roofing Professional, including the Dec Scanner and the RWS Roof & Wall Scanner allowing for continuous and point-of-contact, non-destructive surveying of moisture conditions in roofing and waterproofing systems up to 6 inches (152mm) in depth. The kit also allows for non-destructive measurement of moisture conditions in concrete decks and pin readings in wood decks and roofing materials, relative humidity readings, and ambient and dew point conditions using the Tramex CMEX5 digital moisture meter and probes. An infrared surface thermometer gives surface temperature. This kit comes in a protective heavy-duty wheeled carry case with die-cut foam lining. The Roof Master Kit is used to perform ASTM D7954.


line
Kit Contents
line

  • Tramex DSAL Dec Scanner Roofing Moisture Scanner
  • Tramex RWS Roof Moisture Meter + telescopic handle (for use on roofs)
  • Tramex CMEX5 Concrete Moisture Encounter X5
  • App available for Android and iOS (phone not included)
  • Hand held electrode with 7.8" (200mm) insulated pins
  • 10" (260mm) narrow RH probe
  • Hole punch
  • Tramex IRT2 Infrared Surface Thermometer
  • Extension Handle for CMEX5


line
Specifications
line

Kit:

Size41.2" x 21.1" x 12" (1045mm x 535mm x 305mm)
Weight59.5lbs (27kg)
Power4 x 9 volt PP3 Batteries, 2 x AALR6 ALKALINE Batteries (included)

Tramex DSAL Dec Scanner Roofing Moisture Scanner

Size30"W x 15D x 6"H (762 mm x 400 mm x 158 mm)
Scanning area24"W x 15.5"D (609 mm x 394mm)
Carry case38"W x 20"D x 12"H (940mm x 508 mm x 305mm)
Weight Dec Scanner24.6 lbs (9.95 Kg)
Weight Carry Case21.9 lbs (9.9 Kg)
Total Weight Dec Scanner in Carry Case46.5 lbs (21.1 Kg)
Outer packaging carton weight4.4 lbs (2 Kg)

Total shipping weight

51 lbs (23.1Kg)
Dimensional shipping weight66 lbs (30 Kg)
DisplayAnalog Measuring Range: 0 to 100
Comparative Max. depth of penetration6" (152 mm)
Power Supply2 x 9 Volt PP3 Batteries (included)
LimitationsSome EPDM, Butyl rubber roofing and other conductive roofing

Tramex RWS Roof Moisture Meter + telescopic handle (for use on roofs)

Size4.9" x 10.8" x 2.9" (125mm x 275mm x 75mm)
Weight1.88lbs (853g)
ConstructionABS Body Power: 9 volt PP3
BatteryIncluded
DisplayAnalog Depth of penetration: 4" (100mm)
Sensitivity Four RangesRoofing Mode with high and low sensitivity. EIFS / Foam Roof Insulation Mode with high and low sensitivity
Leather carry caseTelescopic handle for use on roofs only
LimitationsSome EPDM, Butyl rubber roofing and other conductive roofing. Hard Coat Stucco, wire lath or wire mesh reinforced finishes

Tramex CMEX5 Concrete Moisture Encounter X5:

Moisture content for Concrete0 6.9 %
Comparative for Gypsum floor screed0 12
CM Equiv Anhydrite/Concrete02.7 / 0 4.3
Reference scale0 100
Relative Humidity0 99% (with optional Hygro-i2 probe)
Humidity accuracy0% 99%RH 2% @ 25C / 77F
Moisture content for wood5 30 % (with optional wood pin probes)
ConstructionABS Body
Power2 x AALR6 ALKALINE (included)
DisplayDigital
Depth of penetration in concreteapprox. " (20mm)

Tramex IRT2 Infrared Surface Thermometer

Temperature range

-58F ~ 1202F (-50 to 650 C)
Distance to Spot ratioD:S = 12:1
Display resolution0.1 F(0.1C) <1000 1C >1000

Accuracy for targets

Assumes ambient operating temperature of 73 to 77F (23 to 25 C) -58F ~ 68F (-50 ~ 20C) 4.5F (2.5C) 68F ~572F (20C ~300C) 1.0% 1.8F (1.0C) 572F ~ 1202F (300C ~650C) 1.5%

Repeatability

-58~68F (-50~20C) : 2.3F (1.3C) 68~1202F (20~650C) : 0.5% or 0.9F (0.5C)

Response time

150ms

Spectral response

8~14um

Emissivity

Digitally adjustable from 0.10 to 1.0

Over range indication

LCD will show "----"

Polarity: Automatic (no indication for positive polarity)

Minus (-) sign for negative polarity

Diode laser output

<1mW,Wavelength 630~670nm, Class 2 laser product

Operating temp.

32 to 122F ( 0 to 50C)

Storage temp.

14 to 140F (10 to 60C)

Relative humidity

10%~90%RH operating, <80%RH storage

Power supply

9V battery, NEDA 1604A or IEC 6LR61, or equivalent

Safety"CE" Comply with EMC


line
Downloads
line

Tramex RMK Roof Master Kit - Data Sheet
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Quick Guide
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Instruction Manual
Tramex DSAL Dec Scanner Moisture Scanner for Roofing - Data Sheet
Tramex RWS Roof and Wall Scanner - Quick Guide
Tramex RWS Roof and Wall Scanner - Instruction Manual
Tramex RWS Roof and Wall Scanner - Data Sheet
Tramex CMEX5 Concrete Moisture Encounter X5 - Data Sheet
Tramex CMEX5 Concrete Moisture Encounter X5 - Instruction Manual
Tramex IRT2 Infrared Surface Thermometer - Data Sheet
Tramex Meters App - Visualizing, Photographing and Geo-tagging
Tramex Moisture Meters - Accessories

Order Online
Check the items you would like to order then click "Add To Cart". Items typically ship within 1 Week
Product Price
Tramex RMK Roof Master Kit $9,995.00

 



 
 

Powered by Marctin Web Architecture